del mediamtx.yml

This commit is contained in:
deflax 2023-12-31 14:49:11 +00:00
parent c9d8407d58
commit a6bf056ca1

View file

@ -1,564 +0,0 @@
###############################################
# Global settings
# Settings in this section are applied anywhere.
###############################################
# Global settings -> General
# Verbosity of the program; available values are "error", "warn", "info", "debug".
logLevel: info
# Destinations of log messages; available values are "stdout", "file" and "syslog".
logDestinations: [stdout]
# If "file" is in logDestinations, this is the file which will receive the logs.
logFile: mediamtx.log
# Timeout of read operations.
readTimeout: 10s
# Timeout of write operations.
writeTimeout: 10s
# Size of the queue of outgoing packets.
# A higher value allows to increase throughput, a lower value allows to save RAM.
writeQueueSize: 512
# Maximum size of outgoing UDP packets.
# This can be decreased to avoid fragmentation on networks with a low UDP MTU.
udpMaxPayloadSize: 1472
# HTTP URL to perform external authentication.
# Every time a user wants to authenticate, the server calls this URL
# with the POST method and a body containing:
# {
# "ip": "ip",
# "user": "user",
# "password": "password",
# "path": "path",
# "protocol": "rtsp|rtmp|hls|webrtc",
# "id": "id",
# "action": "read|publish",
# "query": "query"
# }
# If the response code is 20x, authentication is accepted, otherwise
# it is discarded.
externalAuthenticationURL:
# Enable the HTTP API.
api: yes
# Address of the API listener.
apiAddress: 127.0.0.1:9997
# Enable Prometheus-compatible metrics.
metrics: no
# Address of the metrics listener.
metricsAddress: 127.0.0.1:9998
# Enable pprof-compatible endpoint to monitor performances.
pprof: no
# Address of the pprof listener.
pprofAddress: 127.0.0.1:9999
# Command to run when a client connects to the server.
# This is terminated with SIGINT when a client disconnects from the server.
# The following environment variables are available:
# * RTSP_PORT: RTSP server port
# * MTX_CONN_TYPE: connection type
# * MTX_CONN_ID: connection ID
runOnConnect:
# Restart the command if it exits.
runOnConnectRestart: no
# Command to run when a client disconnects from the server.
# Environment variables are the same of runOnConnect.
runOnDisconnect:
###############################################
# Global settings -> RTSP server
# Allow publishing and reading streams with the RTSP protocol.
rtsp: yes
# List of enabled RTSP transport protocols.
# UDP is the most performant, but doesn't work when there's a NAT/firewall between
# server and clients, and doesn't support encryption.
# UDP-multicast allows to save bandwidth when clients are all in the same LAN.
# TCP is the most versatile, and does support encryption.
# The handshake is always performed with TCP.
protocols: [udp, multicast, tcp]
# Encrypt handshakes and TCP streams with TLS (RTSPS).
# Available values are "no", "strict", "optional".
encryption: "no"
# Address of the TCP/RTSP listener. This is needed only when encryption is "no" or "optional".
rtspAddress: :8554
# Address of the TCP/TLS/RTSPS listener. This is needed only when encryption is "strict" or "optional".
rtspsAddress: :8322
# Address of the UDP/RTP listener. This is needed only when "udp" is in protocols.
rtpAddress: :8000
# Address of the UDP/RTCP listener. This is needed only when "udp" is in protocols.
rtcpAddress: :8001
# IP range of all UDP-multicast listeners. This is needed only when "multicast" is in protocols.
multicastIPRange: 224.1.0.0/16
# Port of all UDP-multicast/RTP listeners. This is needed only when "multicast" is in protocols.
multicastRTPPort: 8002
# Port of all UDP-multicast/RTCP listeners. This is needed only when "multicast" is in protocols.
multicastRTCPPort: 8003
# Path to the server key. This is needed only when encryption is "strict" or "optional".
# This can be generated with:
# openssl genrsa -out server.key 2048
# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
serverKey: server.key
# Path to the server certificate. This is needed only when encryption is "strict" or "optional".
serverCert: server.crt
# Authentication methods. Available are "basic" and "digest".
# "digest" doesn't provide any additional security and is available for compatibility reasons only.
authMethods: [basic]
###############################################
# Global settings -> RTMP server
# Allow publishing and reading streams with the RTMP protocol.
rtmp: no
# Address of the RTMP listener. This is needed only when encryption is "no" or "optional".
rtmpAddress: :1935
# Encrypt connections with TLS (RTMPS).
# Available values are "no", "strict", "optional".
rtmpEncryption: "no"
# Address of the RTMPS listener. This is needed only when encryption is "strict" or "optional".
rtmpsAddress: :1936
# Path to the server key. This is needed only when encryption is "strict" or "optional".
# This can be generated with:
# openssl genrsa -out server.key 2048
# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
rtmpServerKey: server.key
# Path to the server certificate. This is needed only when encryption is "strict" or "optional".
rtmpServerCert: server.crt
###############################################
# Global settings -> HLS server
# Allow reading streams with the HLS protocol.
hls: no
# Address of the HLS listener.
hlsAddress: :8888
# Enable TLS/HTTPS on the HLS server.
# This is required for Low-Latency HLS.
hlsEncryption: no
# Path to the server key. This is needed only when encryption is yes.
# This can be generated with:
# openssl genrsa -out server.key 2048
# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
hlsServerKey: server.key
# Path to the server certificate.
hlsServerCert: server.crt
# By default, HLS is generated only when requested by a user.
# This option allows to generate it always, avoiding the delay between request and generation.
hlsAlwaysRemux: no
# Variant of the HLS protocol to use. Available options are:
# * mpegts - uses MPEG-TS segments, for maximum compatibility.
# * fmp4 - uses fragmented MP4 segments, more efficient.
# * lowLatency - uses Low-Latency HLS.
hlsVariant: lowLatency
# Number of HLS segments to keep on the server.
# Segments allow to seek through the stream.
# Their number doesn't influence latency.
hlsSegmentCount: 7
# Minimum duration of each segment.
# A player usually puts 3 segments in a buffer before reproducing the stream.
# The final segment duration is also influenced by the interval between IDR frames,
# since the server changes the duration in order to include at least one IDR frame
# in each segment.
hlsSegmentDuration: 1s
# Minimum duration of each part.
# A player usually puts 3 parts in a buffer before reproducing the stream.
# Parts are used in Low-Latency HLS in place of segments.
# Part duration is influenced by the distance between video/audio samples
# and is adjusted in order to produce segments with a similar duration.
hlsPartDuration: 200ms
# Maximum size of each segment.
# This prevents RAM exhaustion.
hlsSegmentMaxSize: 50M
# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
# This allows to play the HLS stream from an external website.
hlsAllowOrigin: '*'
# List of IPs or CIDRs of proxies placed before the HLS server.
# If the server receives a request from one of these entries, IP in logs
# will be taken from the X-Forwarded-For header.
hlsTrustedProxies: []
# Directory in which to save segments, instead of keeping them in the RAM.
# This decreases performance, since reading from disk is less performant than
# reading from RAM, but allows to save RAM.
hlsDirectory: ''
###############################################
# Global settings -> WebRTC server
# Allow publishing and reading streams with the WebRTC protocol.
webrtc: no
# Address of the WebRTC HTTP listener.
webrtcAddress: :8889
# Enable TLS/HTTPS on the WebRTC server.
webrtcEncryption: no
# Path to the server key.
# This can be generated with:
# openssl genrsa -out server.key 2048
# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
webrtcServerKey: server.key
# Path to the server certificate.
webrtcServerCert: server.crt
# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
# This allows to play the WebRTC stream from an external website.
webrtcAllowOrigin: '*'
# List of IPs or CIDRs of proxies placed before the WebRTC server.
# If the server receives a request from one of these entries, IP in logs
# will be taken from the X-Forwarded-For header.
webrtcTrustedProxies: []
# Address of a local UDP listener that will receive connections.
# Use a blank string to disable.
webrtcLocalUDPAddress: :8189
# Address of a local TCP listener that will receive connections.
# This is disabled by default since TCP is less efficient than UDP and
# introduces a progressive delay when network is congested.
webrtcLocalTCPAddress: ''
# WebRTC clients need to know the IP of the server.
# Gather IPs from interfaces and send them to clients.
webrtcIPsFromInterfaces: yes
# List of interfaces whose IPs will be sent to clients.
# An empty value means to use all available interfaces.
webrtcIPsFromInterfacesList: []
# List of additional hosts or IPs to send to clients.
webrtcAdditionalHosts: []
# ICE servers. Needed only when local listeners can't be reached by clients.
# STUN servers allows to obtain and share the public IP of the server.
# TURN/TURNS servers forces all traffic through them.
webrtcICEServers2: []
# - url: stun:stun.l.google.com:19302
# if user is "AUTH_SECRET", then authentication is secret based.
# the secret must be inserted into the password field.
# username: ''
# password: ''
###############################################
# Global settings -> SRT server
# Allow publishing and reading streams with the SRT protocol.
srt: no
# Address of the SRT listener.
srtAddress: :8890
###############################################
# Default path settings
# Settings in "pathDefaults" are applied anywhere,
# unless they are overridden in "paths".
pathDefaults:
###############################################
# Default path settings -> General
# Source of the stream. This can be:
# * publisher -> the stream is provided by a RTSP, RTMP, WebRTC or SRT client
# * rtsp://existing-url -> the stream is pulled from another RTSP server / camera
# * rtsps://existing-url -> the stream is pulled from another RTSP server / camera with RTSPS
# * rtmp://existing-url -> the stream is pulled from another RTMP server / camera
# * rtmps://existing-url -> the stream is pulled from another RTMP server / camera with RTMPS
# * http://existing-url/stream.m3u8 -> the stream is pulled from another HLS server / camera
# * https://existing-url/stream.m3u8 -> the stream is pulled from another HLS server / camera with HTTPS
# * udp://ip:port -> the stream is pulled with UDP, by listening on the specified IP and port
# * srt://existing-url -> the stream is pulled from another SRT server / camera
# * whep://existing-url -> the stream is pulled from another WebRTC server / camera
# * wheps://existing-url -> the stream is pulled from another WebRTC server / camera with HTTPS
# * redirect -> the stream is provided by another path or server
# * rpiCamera -> the stream is provided by a Raspberry Pi Camera
# If path name is a regular expression, $G1, G2, etc will be replaced
# with regular expression groups.
source: publisher
# If the source is a URL, and the source certificate is self-signed
# or invalid, you can provide the fingerprint of the certificate in order to
# validate it anyway. It can be obtained by running:
# openssl s_client -connect source_ip:source_port </dev/null 2>/dev/null | sed -n '/BEGIN/,/END/p' > server.crt
# openssl x509 -in server.crt -noout -fingerprint -sha256 | cut -d "=" -f2 | tr -d ':'
sourceFingerprint:
# If the source is a URL, it will be pulled only when at least
# one reader is connected, saving bandwidth.
sourceOnDemand: no
# If sourceOnDemand is "yes", readers will be put on hold until the source is
# ready or until this amount of time has passed.
sourceOnDemandStartTimeout: 10s
# If sourceOnDemand is "yes", the source will be closed when there are no
# readers connected and this amount of time has passed.
sourceOnDemandCloseAfter: 10s
# Maximum number of readers. Zero means no limit.
maxReaders: 0
# SRT encryption passphrase require to read from this path
srtReadPassphrase:
# If the stream is not available, redirect readers to this path.
# It can be can be a relative path (i.e. /otherstream) or an absolute RTSP URL.
fallback:
###############################################
# Default path settings -> Recording
# Record streams to disk.
record: no
# Path of recording segments.
# Extension is added automatically.
# Available variables are %path (path name), %Y %m %d %H %M %S %f %s (time in strftime format)
recordPath: ./recordings/%path/%Y-%m-%d_%H-%M-%S-%f
# Format of recorded segments.
# Available formats are "fmp4" (fragmented MP4) and "mpegts" (MPEG-TS).
recordFormat: fmp4
# fMP4 segments are concatenation of small MP4 files (parts), each with this duration.
# MPEG-TS segments are concatenation of 188-bytes packets, flushed to disk with this period.
# When a system failure occurs, the last part gets lost.
# Therefore, the part duration is equal to the RPO (recovery point objective).
recordPartDuration: 100ms
# Minimum duration of each segment.
recordSegmentDuration: 12h
# Delete segments after this timespan.
# Set to 0s to disable automatic deletion.
# recordDeleteAfter: 24h
recordDeleteAfter: 168h
###############################################
# Default path settings -> Authentication
# Username required to publish.
# SHA256-hashed values can be inserted with the "sha256:" prefix.
publishUser: recorder
# Password required to publish.
# SHA256-hashed values can be inserted with the "sha256:" prefix.
publishPass: recmeup123
# IPs or networks (x.x.x.x/24) allowed to publish.
publishIPs: []
# Username required to read.
# SHA256-hashed values can be inserted with the "sha256:" prefix.
readUser:
# password required to read.
# SHA256-hashed values can be inserted with the "sha256:" prefix.
readPass:
# IPs or networks (x.x.x.x/24) allowed to read.
readIPs: []
###############################################
# Default path settings -> Publisher source (when source is "publisher")
# Allow another client to disconnect the current publisher and publish in its place.
overridePublisher: yes
# SRT encryption passphrase required to publish to this path
srtPublishPassphrase:
###############################################
# Default path settings -> RTSP source (when source is a RTSP or a RTSPS URL)
# Transport protocol used to pull the stream. available values are "automatic", "udp", "multicast", "tcp".
rtspTransport: automatic
# Support sources that don't provide server ports or use random server ports. This is a security issue
# and must be used only when interacting with sources that require it.
rtspAnyPort: no
# Range header to send to the source, in order to start streaming from the specified offset.
# available values:
# * clock: Absolute time
# * npt: Normal Play Time
# * smpte: SMPTE timestamps relative to the start of the recording
rtspRangeType:
# Available values:
# * clock: UTC ISO 8601 combined date and time string, e.g. 20230812T120000Z
# * npt: duration such as "300ms", "1.5m" or "2h45m", valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h"
# * smpte: duration such as "300ms", "1.5m" or "2h45m", valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h"
rtspRangeStart:
###############################################
# Default path settings -> Redirect source (when source is "redirect")
# RTSP URL which clients will be redirected to.
sourceRedirect:
###############################################
# Default path settings -> Raspberry Pi Camera source (when source is "rpiCamera")
# ID of the camera
rpiCameraCamID: 0
# width of frames
rpiCameraWidth: 1920
# height of frames
rpiCameraHeight: 1080
# flip horizontally
rpiCameraHFlip: false
# flip vertically
rpiCameraVFlip: false
# brightness [-1, 1]
rpiCameraBrightness: 0
# contrast [0, 16]
rpiCameraContrast: 1
# saturation [0, 16]
rpiCameraSaturation: 1
# sharpness [0, 16]
rpiCameraSharpness: 1
# exposure mode.
# values: normal, short, long, custom
rpiCameraExposure: normal
# auto-white-balance mode.
# values: auto, incandescent, tungsten, fluorescent, indoor, daylight, cloudy, custom
rpiCameraAWB: auto
# denoise operating mode.
# values: off, cdn_off, cdn_fast, cdn_hq
rpiCameraDenoise: "off"
# fixed shutter speed, in microseconds.
rpiCameraShutter: 0
# metering mode of the AEC/AGC algorithm.
# values: centre, spot, matrix, custom
rpiCameraMetering: centre
# fixed gain
rpiCameraGain: 0
# EV compensation of the image [-10, 10]
rpiCameraEV: 0
# Region of interest, in format x,y,width,height
rpiCameraROI:
# whether to enable HDR on Raspberry Camera 3.
rpiCameraHDR: false
# tuning file
rpiCameraTuningFile:
# sensor mode, in format [width]:[height]:[bit-depth]:[packing]
# bit-depth and packing are optional.
rpiCameraMode:
# frames per second
rpiCameraFPS: 30
# period between IDR frames
rpiCameraIDRPeriod: 60
# bitrate
rpiCameraBitrate: 1000000
# H264 profile
rpiCameraProfile: main
# H264 level
rpiCameraLevel: '4.1'
# Autofocus mode
# values: auto, manual, continuous
rpiCameraAfMode: continuous
# Autofocus range
# values: normal, macro, full
rpiCameraAfRange: normal
# Autofocus speed
# values: normal, fast
rpiCameraAfSpeed: normal
# Lens position (for manual autofocus only), will be set to focus to a specific distance
# calculated by the following formula: d = 1 / value
# Examples: 0 moves the lens to infinity.
# 0.5 moves the lens to focus on objects 2m away.
# 2 moves the lens to focus on objects 50cm away.
rpiCameraLensPosition: 0.0
# Specifies the autofocus window, in the form x,y,width,height where the coordinates
# are given as a proportion of the entire image.
rpiCameraAfWindow:
# enables printing text on each frame.
rpiCameraTextOverlayEnable: false
# text that is printed on each frame.
# format is the one of the strftime() function.
rpiCameraTextOverlay: '%Y-%m-%d %H:%M:%S - MediaMTX'
###############################################
# Default path settings -> Hooks
# Command to run when this path is initialized.
# This can be used to publish a stream when the server is launched.
# This is terminated with SIGINT when the program closes.
# The following environment variables are available:
# * MTX_PATH: path name
# * RTSP_PORT: RTSP server port
# * G1, G2, ...: regular expression groups, if path name is
# a regular expression.
runOnInit:
# Restart the command if it exits.
runOnInitRestart: no
# Command to run when this path is requested by a reader
# and no one is publishing to this path yet.
# This can be used to publish a stream on demand.
# This is terminated with SIGINT when there are no readers anymore.
# The following environment variables are available:
# * MTX_PATH: path name
# * MTX_QUERY: query parameters (passed by first reader)
# * RTSP_PORT: RTSP server port
# * G1, G2, ...: regular expression groups, if path name is
# a regular expression.
runOnDemand:
# Restart the command if it exits.
runOnDemandRestart: no
# Readers will be put on hold until the runOnDemand command starts publishing
# or until this amount of time has passed.
runOnDemandStartTimeout: 10s
# The command will be closed when there are no
# readers connected and this amount of time has passed.
runOnDemandCloseAfter: 10s
# Command to run when there are no readers anymore.
# Environment variables are the same of runOnDemand.
runOnUnDemand:
# Command to run when the stream is ready to be read, whenever it is
# published by a client or pulled from a server / camera.
# This is terminated with SIGINT when the stream is not ready anymore.
# The following environment variables are available:
# * MTX_PATH: path name
# * MTX_QUERY: query parameters (passed by publisher)
# * RTSP_PORT: RTSP server port
# * G1, G2, ...: regular expression groups, if path name is
# a regular expression.
# * MTX_SOURCE_TYPE: source type
# * MTX_SOURCE_ID: source ID
runOnReady:
# Restart the command if it exits.
runOnReadyRestart: no
# Command to run when the stream is not available anymore.
# Environment variables are the same of runOnReady.
runOnNotReady:
# Command to run when a client starts reading.
# This is terminated with SIGINT when a client stops reading.
# The following environment variables are available:
# * MTX_PATH: path name
# * MTX_QUERY: query parameters (passed by reader)
# * RTSP_PORT: RTSP server port
# * G1, G2, ...: regular expression groups, if path name is
# a regular expression.
# * MTX_READER_TYPE: reader type
# * MTX_READER_ID: reader ID
runOnRead:
# Restart the command if it exits.
runOnReadRestart: no
# Command to run when a client stops reading.
# Environment variables are the same of runOnRead.
runOnUnread:
# Command to run when a recording segment is created.
# The following environment variables are available:
# * MTX_PATH: path name
# * RTSP_PORT: RTSP server port
# * G1, G2, ...: regular expression groups, if path name is
# a regular expression.
# * MTX_SEGMENT_PATH: segment file path
runOnRecordSegmentCreate:
# Command to run when a recording segment is complete.
# The following environment variables are available:
# * MTX_PATH: path name
# * RTSP_PORT: RTSP server port
# * G1, G2, ...: regular expression groups, if path name is
# a regular expression.
# * MTX_SEGMENT_PATH: segment file path
runOnRecordSegmentComplete:
###############################################
# Path settings
# Settings in "paths" are applied to specific paths, and the map key
# is the name of the path.
# Any setting in "pathDefaults" can be overridden here.
# It's possible to use regular expressions by using a tilde as prefix,
# for example "~^(test1|test2)$" will match both "test1" and "test2",
# for example "~^prefix" will match all paths that start with "prefix".
paths:
live:
record: yes
recordPath: ./recordings/live/%Y-%m-%d_%H-%M-%S-%f
# Settings under path "all_others" are applied to all paths that
# do not match another entry.
all_others: